Skip to content

Park Bridge

Bascule drawbridge

Park Bridge is a bascule drawbridge with 29 ft of clearance closed, measured to mean high water. Open, it is charted at 143 ft.

Closed clearance
29 ft
at mean high water
Open clearance
143 ft
span open
Horizontal
125 ft
channel width
Location
47.529°, -122.314°
Washington

Clearances are from NOAA chart US5WA15M, measured to mean high water. Actual clearance is lower whenever the water stands above that level, as at higher tides and in storm surge. Always confirm against your vessel's air draft and the posted clearance gauge before transiting.

Pathr nautical charts

Park Bridge on the chart

Find the bridge and its charted vertical clearance in one view. Select a pin to compare nearby bridges, see open and closed clearances where charted, and open its operating details.

Explore this coast on Pathr’s nautical chart.
Selected location: Park Bridge, 47.5294°N · 122.3144°W.

How to request an opening

Hail on VHF-FM
Channel not listed
not in the bridge's rule
Bridge tender
Sound signal
No published phone. Use VHF or a horn signal.
Advance notice
See the rule
operating schedule below
Operating schedule

(2) The draw of the South Park Bridge, mile 3.8, need not be opened for the passage of vessels from 6:30 a.m. to 8:30 a.m. and from 3:30 p.m. to 5:30 p.m., Monday through Friday except, Federal holidays, other than Columbus Day. (3) Between the hours of 11 p.m. and 7 a.m., Monday through Sunday, the South Park Bridge shall open if at least a 12 hour notice is given by telephone or VHF radio to the drawtender at the South Park Bridge. If emergency responders require a bridge opening between 11 p.m. and 7 a.m., the South Park Bridge shall open within 45 minutes from initial notification to the Fremont Bridge operator. Vessels engaged in sea-trials or dredging activities may request a standby drawtender to open the bridge, on demand, during sea-trials and/or dredging operations, if at least a 24 hour notice is given to the South Park Bridge drawtender. (b) The following bridges shall open on

Source: US Coast Guard drawbridge regulations, 33 CFR 117.1041 (Duwamish Waterway). Confirm before transiting.

Know every bridge before you get there

Pathr checks Park Bridge and every bridge on your route against your boat's air draft, using NOAA charted clearance (automatic route planning is Premium). Free on iPhone and Android. Two months of Premium free.

Frequently asked

What is the clearance under Park Bridge?+

Park Bridge is a bascule drawbridge with 29 ft of clearance closed, measured to mean high water. Open, it is charted at 143 ft. These figures are from NOAA chart data. Real clearance drops whenever the water stands above the level they are measured to, so leave a margin for your air draft.

How do I get Park Bridge to open?+

Contact the bridge tender on VHF-FM, or sound the required signal. Operating schedule: (2) The draw of the South Park Bridge, mile 3.8, need not be opened for the passage of vessels from 6:30 a.m. to 8:30 a.m. and from 3:30 p.m. to 5:30 p.m., Monday through Friday except, Federal holidays, other than Columbus Day. (3) Between

Tides & conditions at this crossing

Clearance under Park Bridge shrinks as the water rises. Check the water level and marine conditions at the nearest NOAA station, Duwamish Waterway, Eighth Ave. South (1 mi away).

Nearby bridges

Free on iPhone and Android

You've got the data. Now put it on your chart.

Pathr puts official NOAA chart data, the tide and the wind on one chart, and the charts work offline.

Premium adds route planning, radar and AIS. New accounts get two months of Premium free.

Optional

Did this tool help?

We build these for the boating community and keep them free, no signup and no ads. If it saved you some time, you can chip in toward the next one.

One-time, secure checkout by Stripe. No account, no subscription. It’s a tip to a small company, so it isn’t a tax-deductible donation.

Free

Or pass it along

Sending this to one boater who needs it helps us more than a few dollars does.

Want to see something in the next tool?

Got a tool you wish existed, or a change to this one? Tell us and we'll build it.

Contact us